Home Benders CNC Tube/Pipe Benders 6″ Unison MS RG CNC Tube Bender

6″ Unison MS RG CNC Tube Bender - AM25401C

Product Details

Stock Number	AM25401C
Brand	Unison
Capacity	6.00 inches

Specifications

6″ Unison MS RG CNC Tube Bender

Model: 6″MSRH New in 2015! Located in California.

Capacities:

Minimum tube diameter: 1″OD (approx.)
Maximum tube diameter: 6” (150mm) OD
Maximum degree of bend: 180° + springback
Maximum bend centerline radius: 24″
Maximum tube length over mandrel end chucked: 240″
Maximum tube length over mandrel through collet: 315″
Bending Rotation: Right Hand (clockwise)

Includes:

Touch Screen Windows Based CNC Control
Servo Stack Shift for X & Z Positioning – Multi stack tools
Leave multiple diameters/tool sets on the machine at one time
Multi-radius bends on a single part
Compound tools for bend-on-bend applications
Electric Servo Mandrel, PDA, Clamp, Pressure Die and Bending Action
Overhead tie-bars for thin wall material/multi-stack tools
Wiper mount for tight-radius and thin wall material
Remote Tech Log in Capability
Tooling mounts can be adapted to run other machine tooling
480Volt @ 180-Amps of 3 Phase Electrics
120psi compressed air required
Specifications per MFG Spec Sheet Subject to Confirmation

Maintenance Instructions

Ensure the area is cleaned and ready for the machine installation. Check the location to ensure the machine is located near suitable electrical power.
Before releasing the machine for production, ensure all guards, covers, and safety devices are installed or set up to meet local safety codes.
If the machine has a hydraulic oil system, be sure it is filled to a suitable level with clean oil.
Confirm the emergency STOP buttons are working properly.
If the machine is hydraulic confirm the pump and motor rotation is correct.
Perform all necessary tooling adjustments before running a cycle.
To prevent unauthorized use of the machine, switch the disconnect to the off position and lockout/tagout according to best practices.

Used Machinery Buyers Guide

Download as PDF

CNC Tube/Pipe Benders

Our Promise to You

AM Industrial Machinery strives to provide high quality pre-owned machinery at a great price!

Quality Products

Many machines undergo a thorough inspection/retrofitting/painting and/or refurbishing.

Strong Customer Service

Our Team is committed to providing excellent customer service from the first machinery quote to the delivery of your equipment to the jobsite.

Extensive Industry Knowledge

Our experienced professionals are here to help you find the right machinery for your application or project.

“Good experience purchasing used tube forming equipment.”

North Ridgeville, OH

“Jason – thank you so much for the excellent job arranging the freight of the equipment we purchased. The driver was courteous and took care of everything very well too!”

Placentia, CA

“Your company was able to supply exactly what I needed.”

Richmond, VA

Request a Quote

AM25401C - 6″ Unison MS RG CNC Tube Bender

216-433-7171 info@amindustrialgroup.com

"*" indicates required fields